Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Reactor Size Calculation

Status
Not open for further replies.
siberhusky

siberhusky

Electrical
Jan 7, 2003
29
In order to limit the Capacitor Outrush current for two 14.4 MVAR and one 18 MVAR 36 kV Capacitor Banks, it was determined that an 800 uH reactor will be required--for a General Purpose Breaker.

What would be the corresponding reactor size when using a Definite Purpose Breaker instead?

 
Status
Not open for further replies.

Similar threads

hhhansen
  • Locked
  • Question
Shunt reactor
Replies
0
Views
659
hhhansen
hhhansen
DrDrreeeaaa
  • Question
Testing Procedures - Transformer Protection, Bus Zone Protection, Feeder, Reactor
Replies
0
Views
3K
DrDrreeeaaa
DrDrreeeaaa
aslamajec123
  • Locked
  • Question
Shunt reactor impact on cable charging current
Replies
6
Views
2K
aslamajec123
aslamajec123
haisa
  • Locked
  • Question
Difference between Earthing Reactor and Earthing Transformer
Replies
3
Views
645
prc
prc
aslamajec123
  • Locked
  • Question
Contribution of shunt reactor in reducing the cable charging current
Replies
1
Views
1K
cuky2000
cuky2000

Part and Inventory Search

Sponsor

Back
Top Bottom