Hi everyone,
I am currently working on an experiment. There is an existing methane gas line connected to a reactor in the lab (plug flow) but i'd like to connect an ethane line to the reactor as well through a mass flow controller (GFC) with the same flowrate as the methane gas. Any ideas how this can be done with minimal losses.
Thank you.
I am currently working on an experiment. There is an existing methane gas line connected to a reactor in the lab (plug flow) but i'd like to connect an ethane line to the reactor as well through a mass flow controller (GFC) with the same flowrate as the methane gas. Any ideas how this can be done with minimal losses.
Thank you.
