Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

RCWALLS PLANTED ON CONCRETE BEAMS

Status
Not open for further replies.
SAYATTIA

SAYATTIA

Structural
Joined
Jun 23, 2010
Messages
20
Location
SA
GENTLEMEN:
THERE IS CONCRETE WALL PLANTED ON CONCRETE BEAM IN ONE OF THE MODELING I AM DOING NOW. I HAVE NOTICED THAT THE MOMENT ON THE BEAM SUPPORTING THE WALL IS SMALL VALUE AND NOT PARABOLIC.SHAPE.
I TRIED ONCE AGAIN ON A PLANE WALL ( ON 2D) AND I FACED THE SAME PROBLEM. WHEN I INCREASE THE I33 FACTOR OF THE BEAM THE MOMENT SHAPE WILL BE BETTER BUT STILL NOT CORRECT. AND I AM A WORRY THAT THE INCREASE OF THE BEAM STIFFENER MAY AFFECT THEN RESULTS OF THE 3D MODEL.
I NEED YOUR ADVISE PLEASE.

 
Status
Not open for further replies.

Similar threads

J
  • Locked
  • Question Question
Question about the definition of transfer beams in a pile cap for a pedestrian bridge foundation
Replies
0
Views
2K
jcarlosamao
J
A
  • Locked
  • Question Question
CSI BRIDGE "Design request" for Precast Concrete I Girder bridge does not work when the defined beam is nonprismatic !!!
Replies
0
Views
884
Abderrahmane Mche
A
hadsyogs
  • Locked
  • Question Question
Error 9 on SAP2000 "subscript out of range" ,help
Replies
3
Views
2K
CSIESPL INDIA
CSIESPL INDIA
X4vier
  • Locked
  • Question Question
KL/r<200 how to make SAP2000 omit this requirement on auto-select lists?
Replies
9
Views
2K
X4vier
X4vier
Vibration Lover
  • Locked
  • Question Question
How to find the total forces in each cross sections if we model the concrete stack by plate elements
Replies
0
Views
208
Vibration Lover
Vibration Lover

Part and Inventory Search

Sponsor

Back
Top