Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Rc Design Results True?

Status
Not open for further replies.
Baltali

Baltali

Structural
Joined
Apr 1, 2009
Messages
13
Location
TR
This model in the attachment is a sample building with limited random load combinations in order to test the RC Designer "Column Design" Results.

I have used ACI-318-05 with default brief data and by selecting all load combinations.

I am not satisfied with the As provided results because the program does not check the "most critical LC" for most of the columns.
 
Status
Not open for further replies.

Similar threads

PKOM
  • Locked
  • Question Question
Design capacity tablr
Replies
1
Views
1K
SethGuthrie
SethGuthrie
yar.rabiv
  • Locked
  • Question Question
Sample concrete design - output not showing reinforcement
Replies
0
Views
1K
yar.rabiv
yar.rabiv
user11596
  • Locked
  • Question Question
Does Staad / RCDC check and design for deep beams?
Replies
0
Views
997
user11596
user11596
Settingsun
  • Locked
  • Question Question
Results scales with mouse wheel
Replies
5
Views
865
Settingsun
Settingsun
Awre
  • Locked
  • Question Question
Modeling Simple Slab in STAAD - Need help with the results
Replies
5
Views
686
JoshPlumSE
JoshPlumSE

Part and Inventory Search

Sponsor

Back
Top