Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Random Analysis

Status
Not open for further replies.
02032012

02032012

Mechanical
Joined
Mar 2, 2012
Messages
1
Location
BR
Hi Everyone! I would like to know how to perform a random analysis considering PSDF input in the directions x, y and z using Patran interface. I have found the "Example 1: Cylinder subjected to base PSDF input" but in this case only the x direction is used.
Thanks!

kirsten_84
 
Status
Not open for further replies.

Similar threads

MihaelaN
  • Locked
  • Question Question
Shock Response Spectrum Analysis Patran/ Nastran
Replies
0
Views
638
MihaelaN
MihaelaN
Gilangms
  • Locked
  • Question Question
msc patran stress analysis
Replies
1
Views
243
cohoman
cohoman
Johanlangman
  • Locked
  • Question Question
Error generating *.fo6 files; analysis failure
Replies
2
Views
730
dmapguru
dmapguru
jedstress
  • Locked
  • Question Question
Contact body analysis sol101
Replies
4
Views
1K
dfreire
dfreire
marco_mg
  • Locked
  • Question Question
Strain energy request, in a transient implicit non-linear analysis - SOL400
Replies
0
Views
280
marco_mg
marco_mg

Part and Inventory Search

Sponsor

Back
Top