Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

RAM Elements

Status
Not open for further replies.
neffers

neffers

Structural
Joined
Oct 11, 2002
Messages
63
Location
US
In RAM Elements is there a way to make a member "inactive"? If there is, I can't seem to find it.

Thanks in advance!

Neffers
 
Sort by date Sort by votes
RAM Elements does not have an inactive member command. There is quite a lot you can do with member hinges (releases), but the member properties are always used for all load cases (with the exception of the tension-only member assignments which are evaluated case by case).

For a true inactive member approach, you might want to consider STAAd.pro.
 
Upvote 0 Downvote
Thanks Seth...that is what I thought...but just didn't know if I was missing something obvious.

neffers
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

strguy11
  • Locked
  • Question Question
Ram concrete tall building modeling
Replies
1
Views
1K
BulbTheBuilder
BulbTheBuilder
BulbTheBuilder
  • Locked
  • Solved
RAM Concept tendon types
Replies
12
Views
1K
BulbTheBuilder
BulbTheBuilder
strongconnection
  • Locked
  • Question Question
RAM SS pricing vs Others
Replies
1
Views
959
SethGuthrie
SethGuthrie
PSR_1
  • Locked
  • Question Question
Ram concept Eurocode section 7.3
Replies
1
Views
976
SethGuthrie
SethGuthrie
wzBZ
  • Locked
  • Question Question
Ram concept
Replies
1
Views
1K
SethGuthrie
SethGuthrie

Part and Inventory Search

Sponsor

Back
Top