Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

"T"slot cutters

Status
Not open for further replies.
in2010in

in2010in

Mechanical
Feb 24, 2010
7
Hi Goodmorning frds

How to cut "O"Ring grooves useing "T" slot cutters.
Thax
 
Replies continue below

Recommended for you

Sort by date Sort by votes
Planar milling, Face milling, Feature based hole milling can all be used.

Mark Rief
Product Manager
Siemens PLM
 
Upvote 0 Downvote
If the width of the groove has a narrow tolerance and groovewidth is not equal to the t-cutter cutting length, we use a T-cutter with two tracking points defined [front/back side], and use this tool within the planar-profile operation [actually 2 operations].
Bert
 
Upvote 0 Downvote
Surface Area milling might be useful in this kind of opirations.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

MANox
  • Locked
  • Question
Change tabs bar posiotion to "centered"
Replies
2
Views
353
MANox
MANox
Asieros
  • Locked
  • Question
Siemens NX Drafting - Reset the "Border to Arrow Distance"
Replies
0
Views
623
Asieros
Asieros
Anton Liubimov
  • Locked
  • Question
NxOpen, How to programmatically open a dialog box "Extrude"
Replies
2
Views
664
Anton Liubimov
Anton Liubimov
esikoglu
  • Locked
  • Question
thePart.CAMSetup.CAMGroupCollection.FindObject("MCS_MILL"); cannot find the object
Replies
0
Views
187
esikoglu
esikoglu
DDerek
  • Locked
  • Question
How to make "Balloon" Result in only the number for the callout
Replies
3
Views
447
SDETERS
SDETERS

Part and Inventory Search

Sponsor

Back
Top Bottom