"swimming pool installation design"

[mechmaj]

Hi Friends!
Can anybody tell me good references for design a complete system of a roofed swimming pool mechanical installations such as: sizing, water heating, filtering, distribution,general desin factors...
Thank you all in advance.

 

[orenda1168]

I'd suggest you contact a local pool builder for this information inasmuch as they do this for a living and will have all the information you require.

Orenda

 

[sbush]

You need to get a copy of the 10 State Standard for public swimming pools.

Here is a synopsis of the manual: "Recommended Standards for Swimming Pool Design and Operation (1996 ed.)
This manual is intended as a guide for the design and operation of public swimming pools; to encourage submission of plans for proposed public swimming pools or their improvement; and to establish, as far as practical, uniformity of practice among several states. Prepared by the Standards Committee on Swimming Pools and Bathing Beaches of the Great Lakes-Upper Mississippi River Board of State Sanitary Engineers. Cost $ 6.00 ".

You can purchase by going to

http://www.hes.org

and clicking on "10 State Standards".

S. Bush

http://www.water-eg.com

 

[sbush]

If you are looking for free assistance for budget pricing, typical specifications and drawings, I would contact

http://www.paddockindustries.com.

S. Bush

http://www.water-eg.com