"Are you trying to make a derived part?" 1

[huronico]

SolidWorks 2006
I try to insert an emboss from the design library to a sheet-metal part and I receive the message: "Are you trying to make a derived part?"
I miss something in the settings?

Thanks.

 

[JMirisola]

Right click on the folder and make sure "forming tools folder" is checked.

Jeff Mirisola, CSWP
Certified DriveWorks AE

http://designsmarter.typepad.com/jeffs_blog

Dell M90, Core2 Duo
4GB RAM
Nvidia 3500M