Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Pump curve for older Peerless Fire Pump

Status
Not open for further replies.
FFP1

FFP1

Mechanical
Joined
Jan 22, 2007
Messages
211
Location
US
Does anyone know where I can find the manufacturer's pump curve for a 1,500 gpm @ 125 psi Peerless Model 6AF 15-B fire pump?

I am not sure about the manufacture date, but the pump is 20+ years old, has serial #313999 and the pump diameter is 17 in.
 
Sort by date Sort by votes
Call Peerless and give them the serial number they will send you the test curve from the bench test when new.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

bob smith
  • Locked
  • Question Question
Flow test or fire pump test
Replies
7
Views
2K
cdafd
cdafd
jjmoore73
  • Locked
  • Question Question
Fire Pump Sizing
Replies
5
Views
1K
UFT12
UFT12
Jeng84
  • Locked
  • Question Question
Fire pump potable water requirements
Replies
3
Views
1K
Heaviside1925
Heaviside1925
Erfan z
  • Locked
  • Question Question
Fire Pump Motor
Replies
5
Views
561
LCREP
LCREP
jjmoore73
  • Locked
  • Question Question
Fire Pump Maximum Static Suction Pressure
Replies
5
Views
1K
jjmoore73
jjmoore73

Part and Inventory Search

Sponsor

Back
Top