Pull rods for creep test 1

[AleksandarLPO]

Hello all,
I need help to find supplier for new pull rods for creep testing device. Material is MAR M246.

Best Rgards

 

[TVP]

Here is one option:

http://www.atspa.com/materials9f7b.html?pageId=2161392210281151075444127

 

[AleksandarLPO]

Thank you, I tried with them they have to reply to me are they willing, or can, make different diameter than they have on stock. Any other supplier if you can think of?

 

[TVP]

Zwick/Roell

http://www.zwickusa.com/no_cache/en...tml?tx_z7treedependingdownloads_pi1[file]=367

 

[jwhit]

You might also check with Instron, I believe their Satec division is still building creep machines and pull rods.

 

[AleksandarLPO]

Still did not found anyone who can and will produce these pull rods.

 

[LEB1]

if you are not too fussy with the source

http://www.chinasteelsuppliers.com/High-alloy/mar-m-246.html

otherwise Zwick / Roell do use this material for their pull rods
alternatively we use nimonic 105 for stress rupture pull bars which works well, if you can get some of course

 

[AleksandarLPO]

Finally I will make shells and cast bars myself. Machining should not be a problem!