Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

PSC pile splicing

Status
Not open for further replies.
sccci

sccci

Structural
Joined
Jun 30, 2004
Messages
5
Location
US
I am looking for information on designing and calculating the required capacities for epoxied pile splices. If anyone knows of a good resouce or has any advice it'd be greatly appreciated.
 
Status
Not open for further replies.

Similar threads

Beanbag1
  • Locked
  • Question Question
Location of Critical Perimeter (per ACI) for Concrete Pile Cap (single square cap for one pile)
Replies
2
Views
1K
rapt
rapt
swearingen
  • Locked
  • Question Question
Pile Cap Bottom Reinforcement Sitting on Piles
Replies
6
Views
1K
rapt
rapt
Goble Pile Check h2r
  • Locked
  • Article Article
Dynamic Load Test (DLT) - Pile Driving Analysis
Replies
0
Views
294
Goble Pile Check h2r
Goble Pile Check h2r
Joco management
  • Locked
  • Question Question
Stir ups for anchor bolts in pile caps and gb
Replies
3
Views
263
BridgeSmith
BridgeSmith
pbc825
  • Locked
  • Question Question
Partial Development of Pile Cap Longitudinal Bars for Post-Installed Anchors
Replies
13
Views
1K
dauwerda
dauwerda

Part and Inventory Search

Sponsor

Back
Top