Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ProPressG

Status
Not open for further replies.
KLH

KLH

Mechanical
Jan 25, 2002
75
Hi, I'm looking for anyone who had an experience, good or bad, with ProPressG for steel natural gas piping. Thanks.
 
Replies continue below

Recommended for you

Sort by date Sort by votes
Think this is more for the plumbing forum....

You could have provided a link or a drawing.

Remember - More details = better answers
Also: If you get a response it's polite to respond to it.
 
Upvote 0 Downvote
Thanks. That's where I posted it first but that forum doesn't get a lot of action.

And I don't know if you are familiar with MasterSpec but they recently moved the gas piping specifications from Division 22 Plumbing to Division 23 HVAC....so I figured I'd post it here as well.

Here's a link to Viega's website....but if you need that then you don't have any experience with it ;)

 
Upvote 0 Downvote
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top Bottom