Properties for CS Plate - AS1548-1-430

[LarryDavid]

G'Day,

Would anyone know the material properties for old Carbon Steel Plate (AS1548-1-430).

In particular I am after the tensile strength, Yield Strength and design allowable stress (MPa).

The plate was used in a heat exchanger designed to AS1210-1977 (Pressure Vessels).

Could anyone tell me which edition of AS1548 this would be applicable to?

Any info would be much appreciated.

Kind Regards
Damian

 

[smslab]

Could the standards listed on this page be helpful?

http://www.bluescopesteel.com.au/go/product/sa/as-1548-7-460t-xlerplate

 

[MOB1]

Thwe 430 is the minimum tensile strength in MPa.

 

[robsalv]

Don't know about the 1977 side of things, but my superseded 1989 copy AS1210 shows AS1548 7-430 has an allowable stress of 108MPa up until 325degC for all grades.



- - - - - - - - - - - - - - -
"Life! No one get's out of it alive."
"The trick is to grow up without growing old..."

 

[LarryDavid]

Thanks for the response guys,

I have since found out that the 430 is indeed the tensile strength, and AS1210 used a factor of 4 for the allowable (108 MPa).

Only unknown is the yield strength, I am hoping it shouldn't be too different to AS1548-7-430 from that era also.

Cheers
Damian