Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Proper Polished Rod Makeup
- Thread starter joe123456
- Start date
Make up torque for the Polish Rod is the same as for the the equivilant pin size sucker rod. ie. 7/8" polish rod pin requires the same torque as 7/8" rod.
The MAJOR point to be aware of is the polish rod coupling is a special thread that has a 9 degree angle in the back of the thread. substitution of a regular rod coupling vs. a polish rod coupling will increase the chance of failure.
The MAJOR point to be aware of is the polish rod coupling is a special thread that has a 9 degree angle in the back of the thread. substitution of a regular rod coupling vs. a polish rod coupling will increase the chance of failure.
- Status
Similar threads
- Locked
- Question