Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

projection welding of ss 409 to sa 213 t11

Status
Not open for further replies.
qalab

qalab

Mechanical
Joined
Aug 22, 2002
Messages
7
Location
IN
please can anybody help me with the parameter setting for projection welding of SS409 to SA213 T11

fin thiclness - 2 mm
tube thickness - 4 mm
 
Sort by date Sort by votes
There are various parameters or essential variables, and not just any one parameter, for projection welding. For example, the projection height and width on the fin to be joined to the tube, electrode force to assure adequate contact for spot welding, weld cycle time and current.

Can you provide some additional information on your specific application?
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

metaleng123
  • Locked
  • Question Question
Knife-line Attack prevention when welding 321 SS
Replies
11
Views
1K
MFAMET
MFAMET
Rakesh Ahluwalia
  • Locked
  • Question Question
MIG welding of Tube SA213 T23 with Fin SA387 Gr 22
Replies
0
Views
331
Rakesh Ahluwalia
Rakesh Ahluwalia
sahsanb
  • Locked
  • Question Question
SS 321H Material Welding Joints PWHT Necessity
Replies
7
Views
589
sahsanb
sahsanb
wontweldcantweld
  • Locked
  • Question Question
42CrMoV forgings - welding variables
Replies
2
Views
697
WKTaylor
WKTaylor
Dusty Dave
  • Locked
  • Question Question
Failure of Wind Fence due to corrosion
Replies
4
Views
1K
Tensile_test_my_spine
Tensile_test_my_spine

Part and Inventory Search

Sponsor

Back
Top