Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Project to a Point

Status
Not open for further replies.
rossly

rossly

Automotive
Joined
Sep 22, 2003
Messages
115
Location
US
All,

I am attemting to project periphery edges onto a sphere inside the periphery toward the center point of the sphere. Any help would be great.

Ross.
 
Sort by date Sort by votes
Ross, is that not projecting a curve normal to surface?

Regards,
Derek
 
Upvote 0 Downvote
Derek,

I did it that way and it looks correct. I come from a UG background and an option on the projection is towards a point. I tested it with decteasing the sphere size and the projected curves followed suit.

Thanks.
 
Upvote 0 Downvote
Not a problem - the joys of multi software background.

Regards,
Derek
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

A
  • Question Question
CATIA Macro to give Overall Dimensions to a View
Replies
3
Views
880
ferdo
ferdo
DiaeArrahmane
  • Locked
  • Question Question
CATIA MACRO: create a new point from a reference point
Replies
2
Views
669
DiaeArrahmane
DiaeArrahmane
U
  • Locked
  • Question Question
Point on curve on min curvature radius
Replies
4
Views
2K
ulitsakalarash
U
Med Che
  • Question Question
How to get the link of a 2D Component Instance from a Drawing Catalog in CATIA VBA?
Replies
3
Views
5K
Little Cthulhu
Little Cthulhu
Jegsaran
  • Locked
  • Question Question
Read point coordinates in CATIA using python
Replies
1
Views
1K
LWolf
LWolf

Part and Inventory Search

Sponsor

Back
Top