Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Programming Suggestion: Code Case 2547
- Thread starter bhindle
- Start date
Reply: It is the opinion of the Committee that alternatives
may be used for design of flange rigidity in lieu
of the rules in Appendix 2-14. Acceptable alternatives
include successful service experience with a specific
design, or any method that satisfies the requirements of
U-2(g).
This Case number shall be recorded on the Manufacturer’s
Data Report.
may be used for design of flange rigidity in lieu
of the rules in Appendix 2-14. Acceptable alternatives
include successful service experience with a specific
design, or any method that satisfies the requirements of
U-2(g).
This Case number shall be recorded on the Manufacturer’s
Data Report.
- Status
Similar threads
- Locked
- Question