Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Process engineer duties in T&I

Status
Not open for further replies.

pengyk

Chemical
Joined
Nov 19, 2007
Messages
1
Location
VE
Hi folks, i am a chemical engineer working in the oil industry, currently running without much guidance in the process engineering department. What i need is a checklist and if possible brief explanation of what the duties of a process engineer during turnaround and inspections are, i will be focusing on Delayed cokers (including fractionation column) and HDT.
 
For your own good, I believe that should come from your boss, and not an engineering forum. Then, if you have any questions on how to achieve those tasks, we can help.

Good luck,
Latexman
 
You might want to check w/ the manufacturer... Thye usually have good info....
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top