smain06
Mechanical
- Mar 6, 2008
- 10
Hi every body
We have three PSV fulfo installed on the discharge pump lubricating the bearings of the turbo-expander
(MAFI TRUNCH.
this PSV is operating with 30 barg in the suction side and have 22 barg a back pressure
I want if anyone have or know the exact procedure to calibrate for this PSV
Thank for your help.
We have three PSV fulfo installed on the discharge pump lubricating the bearings of the turbo-expander
(MAFI TRUNCH.
this PSV is operating with 30 barg in the suction side and have 22 barg a back pressure
I want if anyone have or know the exact procedure to calibrate for this PSV
Thank for your help.
