Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Problems with curvatures

Status
Not open for further replies.
ferro1001

ferro1001

Automotive
Joined
Aug 11, 2004
Messages
32
Location
DE
Hello,

I am doing a model in CATIA in order to import it to ABAQUS. This model has some parts with curvature ratio of about 20 meters and when I try to join a line, for example,in the squetch with a curve with this curvature it doesn´t join well, when I zoom the join point I see there is a gap. Anybody knows how to work this out?

Thanks
 
Status
Not open for further replies.

Similar threads

P
  • Question Question
How Can Delete Product Description With Macro
Replies
2
Views
2K
Proportions
P
G
Problem with Title Block updation
Replies
1
Views
1K
MrCATIA
M
J
Help with assembly error
Replies
0
Views
969
junior999
J
M1nh
  • Locked
  • Question Question
FileSelectionBox CatFileSelectionModeSave with initial path/name
Replies
1
Views
919
Little Cthulhu
Little Cthulhu
Antoine Delarche
  • Locked
  • Question Question
3Dexperience: hide/show parts from an assembly with a rule
Replies
0
Views
925
Antoine Delarche
Antoine Delarche

Part and Inventory Search

Sponsor

Back
Top