Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Problem with Run

  • Thread starter Thread starter venkataramu
  • Start date Start date
Status
Not open for further replies.
V

venkataramu

Guest
Dear Friends,


First time I am practicing Mechanica.I applied all lods and constraints.In Mech struct menu, the option RUN is there but it is disabling.I am not understanding the problem.Please help me regarding this.I am working 2001 version.


Ramu
 
hi ramu,


before you can do the run , you have to define the analysis. only then the run is highlighted. Since you are a begginer, i suggest you see some basic tutorials. you can get alot online for free. here's one such link:


http://www.me.uvic.ca/~mech410/proe_tutorials.html


Sarita
 
You can learn the basics using mechanica's own help integrated in the software on the menu bar. Sarita is right that you have not probably defined an analysis yet. Or, although you can define all loads and constraints as well as mesh your model under FEM mode, you are not allowed to run an analysis. So make sure you are working under Integrated Mechanica Mode of Pro/E, or standalone Mechanica.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top