Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Problem Fillet Edges with variable radius

  • Thread starter Thread starter Aleks-117
  • Start date Start date
A

Aleks-117

Guest
Hi everyone, I need help with a problem, i speak a little english so i'll try explain me, I need fillet (round) this edges:
View attachment 1279

I tried with manual Fillet/Constant radius and Variable Radius and the result its not satisfactory because the vertex its not perfect, the vertex have imperfections like this:

This is with Variable radius:

View attachment 1280

View attachment 1281

View attachment 1282



As seen, the vertex have a sinking surface, and i need the all surfaces/Edges join in a one vertex, I dont care if the radius of the edges is variable.

If you need the model i can provide it.

Thanks for your help.
 

Attachments

  • d50qES.jpg
    d50qES.jpg
    20.4 KB · Views: 0
  • NDfrJn.jpg
    NDfrJn.jpg
    109.3 KB · Views: 0
  • fPy9Rc.jpg
    fPy9Rc.jpg
    17.7 KB · Views: 0
  • frDD6X.jpg
    frDD6X.jpg
    23.2 KB · Views: 1

Part and Inventory Search

Sponsor

Back
Top