pro/mfg tutorials

[roshan]

Hi all,

I want to learn pro/mfg so i need tutorials for the same or

can anybody suggest me a site for learning pro/nc post processor.

 

[Trafo]

Hi roshan...



I have some tutorials of pro/mfg for pro/e 20, but you can do this for any pro/e version.



Search in this page



http://www.staffs.ac.uk/~entdgc/tutorials.htm



Good look



PD: You can help me with tutorials of pro/program PLEASE I need them...



Bye

 

[roshan]

http://www.kinetivision.com/freevids/simp_pro_program.htm



Hi there thanks for the info regarding pro/mfg. try these for pro/program.

 

[flamy]

PTC provides complete tutorials for turning, milling, GPOST, ... for download on PTC.COM Tech support web page : Pro/NC Central : http://www.ptc.com/cs/cs_23/howto/gim7903/gim7903.htm

GPOST Central (basic and advanced tutorials, PP lib, macro lib): http://www.ptc.com/cs/cs_23/howto/ncgp4903/ncgp4903.htm

VERICUT Central (tutorials): http://www.ptc.com/cs/cs_23/howto/evs8023/evs8023.htm



You will need your PTC Tech support password to access.





Francois

 

[lfidanci]

http://www.leventfidanci.envy.nu

 

[AASIM]

Look at


http://www.proetutorials.com/
Edited by: AASIM