Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Pro/Engineer IGES Assembly to Pro/Concept

  • Thread starter Thread starter cmindler
  • Start date Start date
Status
Not open for further replies.
C

cmindler

Guest
I'm trying to export a Pro/Engineer assembly comprising to 2+ part into Pro/Concept.
 
save as in assy mode and select the surfs option. This will flatten the assembly into a single iges part.



* Next maintenance release in March will be able to open native pro files and assemblys.

Good Luck

Mike
 
Status
Not open for further replies.

Similar threads

Designer_D
  • Locked
  • Helpful tip Helpful tip
Original Pro/Engineer Blue Background Color Values (thread554-165973)
Replies
0
Views
1K
Designer_D
Designer_D
pmbov
  • Locked
  • Question Question
Creo 10 Pro/program Problems
Replies
7
Views
2K
3DDave
3DDave
J
  • Locked
  • Question Question
How to disable auto snapping in assembly?
Replies
1
Views
2K
3DDave
3DDave
L
  • Solved
Using JLink (Java OTK Free) to Run Predefined FEA Simulation
Replies
6
Views
9K
lm222
L
whatev-nvm
  • Locked
  • Question Question
OBJ of a simp rep of an assembly gets exported with incorrect coordinate system
Replies
0
Views
1K
whatev-nvm
whatev-nvm

Part and Inventory Search

Sponsor

Back
Top