Printing onto A4 sheets

[mps7642]

It should be easy but I need to print some "original A0 drawings" onto a simple coulour inkjet Officejet 1150C.

I've tried altering the scale factor on the File - PRINT area but nothing changes.

I've used autoscale button to get the whole drawing onto the screen and that wotks fine but Print preview and every other activity just leads to frustration and a tiny part of the drawing being printed.

It's probably simple, HELP doesn't seem to cover it INSIDE SOLIDWORKS book ignores the problem.

Would appreciate help before I go mad.

Many thanks

 

[BBJT]

Try the scale to fit under the File, page setup pull down. BBJT CSWP