Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Printing 1:1 true scale in V5 using a typ printer

Status
Not open for further replies.
cougfan

cougfan

Aerospace
Joined
Oct 14, 2004
Messages
31
Location
US
Does anyone know how to print 1:1 without a plotter? I draw a 6" square to test the printer. The square becomes a rectangle when printed. One direction gets an extra 1/8".
 
Status
Not open for further replies.

Similar threads

A
  • Question Question
CATIA V5 DRAFTING/DRAWING TITLE BLOCK SCALE UPDATE
Replies
5
Views
4K
amadali
A
Sidtha
  • Locked
  • Question Question
How to loop through already opened .CATDrawing files in catia v5 using vba
Replies
3
Views
4K
Little Cthulhu
Little Cthulhu
Sidtha
Get the required proprties from the property window from the bundle segment in catia v5 using vba
Replies
3
Views
6K
crshears
crshears
A
  • Question Question
CATIA V5 ASSEMBLY DESIGN CONSTRAINS
Replies
4
Views
6K
ferdo
ferdo
R
  • Question Question
CATIA V5 Automation creating Dimension
Replies
1
Views
1K
qiushui
qiushui

Part and Inventory Search

Sponsor

Back
Top