Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Principal Stresses - hoop and radial stress?

Status
Not open for further replies.
BrianE22

BrianE22

Specifier/Regulator
Joined
Mar 21, 2010
Messages
1,072
Location
US
I'm learning Solidworks FEA. I have a disk for which I'm applying a centrifugal load. I'm looking for the tangential (hoop) stress and the radial stress to compare to the standard equations. I believe that would be Principal Stresses?
 
Sort by date Sort by votes
Never mind, I found some stuff on the web that shows how to get plots of radial and hoop stresses.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Joel_Lapointe
  • Locked
  • Question Question
Cylindrical coordinate system shear stresses for SolidWorks Simulation?
Replies
0
Views
1K
Joel_Lapointe
Joel_Lapointe
notfeagod
  • Locked
  • Question Question
stress concentrations at countersink
Replies
0
Views
868
notfeagod
notfeagod
AH_AK
  • Locked
  • Question Question
Beam Transverse Shear Stress Calculation
Replies
0
Views
455
AH_AK
AH_AK
Denny Gibson
  • Locked
  • Question Question
SolidWorks 2018 Simulation: Simultaneous solution of mechanical and thermal stresses?
Replies
1
Views
312
FEA way
FEA way
lcatg
  • Locked
  • Question Question
Stress induced in a cantilever beam with End point load and half sine wave shock
Replies
2
Views
358
lcatg
lcatg

Part and Inventory Search

Sponsor

Back
Top