Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Pressurizing a Vessel with Air 1

Status
Not open for further replies.

kryanl

Mechanical
Jul 30, 2001
34
I am having trouble trying to figure out in a ballpark way, how to determine what flow rate of air is needed to pressurize a vessel to a known pressure, in a set time. I.e, a 8,500 ft3 vessel to 5 psig in 30 min. The inlet line size will be determined at a later date. I vaguely remember from school a couple simple equations that can be used, but all I can think of at the moment is Q=(rho)*A*V, and that doesn't help, since it doesn't deal with pressure. I appreciate your help.

Kayla
 
Replies continue below

Recommended for you

Howdy!

Let's assume the tank is initially filled with air at 14.7 psia with air weighing .075 lb per cubic foot. Then the initial weight of air in the tank is .075 lb/ft^3 X 8500 ft^3 = 637.5 lb.

Tnen let's assume the tank is filled at constant temperature to 19.7 psia.

New weight is 637.5 X 19.7/14.7 = 854.34 lb.

New weight minus old weight = 854.34-637.5 = 216.34 lb.

To fill in 30 min, flow rate = 216.34/30 = 7.23 lb/min.

To change this to SCFM, divide by standard weight density (.075).

Flow rate = 7.23/.075 = 96.37 scfm.

Did this help?

Pat http//
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor