Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
pressure testing stainless steel fittings
- Thread starter mflower
- Start date
EdStainless
Materials
ASTM E1003 is a generic Hydroststic Leak Testing spec.
If you are looking for a fitting specifi spec then you need to look in ASME.
= = = = = = = = = = = = = = = = = = = =
Rust never sleeps
Neither should your protection
If you are looking for a fitting specifi spec then you need to look in ASME.
= = = = = = = = = = = = = = = = = = = =
Rust never sleeps
Neither should your protection
- Thread starter
- #5
EdStainless
Materials
There are no ASTM specs based on service pressure. That is your responsability as the user. You need to look in the piping and fitting codes for guidance on pressure ratings.
= = = = = = = = = = = = = = = = = = = =
Rust never sleeps
Neither should your protection
= = = = = = = = = = = = = = = = = = = =
Rust never sleeps
Neither should your protection
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question