Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Pressure Conversion Factor

Status
Not open for further replies.
FredGarvin

FredGarvin

Mechanical
Joined
Oct 10, 2001
Messages
221
Location
US
Does anyone happen to have a conversion factor for a pressure unit, inABR4? I believe this unit is a throwback from the days of yesteryear. I sure don't know of anyone that uses it. It so happens that I have a test spec that references one pressure measurement in this unit. Thanks!
 
Sort by date Sort by votes
Well, I went out and found an MSDS sheet with the specific gravity of this stuff and calculated the conversion. No big deal. If anyone out there still has run across this unit of pressure I'd like to know where it was from and what industry. Now it's simply a matter of curiosity. Sorry for taking up bandwidth.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

ArunKumar Bala
  • Locked
  • Question Question
Crippling stress - Plasticity factor
Replies
5
Views
3K
Ng2020
Ng2020
MihaelaN
  • Locked
  • Question Question
Fatigue Strain-Life curve conversion to Stress-Life curve
Replies
8
Views
1K
LiftDivergence
LiftDivergence
HighPressureProfessor
  • Locked
  • Question Question
Understanding Repair Limits for Air Seal Serration in Gas Turbine High Pressure Rotor Sections
Replies
8
Views
747
WKTaylor
WKTaylor
Burner2k
  • Locked
  • Question Question
Help with Flow Area Knockdown Factor (?) Research
Replies
8
Views
489
Burner2k
Burner2k
dennisbernal91z
  • Locked
  • Question Question
Center of pressure calculation for cylindrical bodies with abnormal shaped nose cones
Replies
9
Views
507
WKTaylor
WKTaylor

Part and Inventory Search

Sponsor

Back
Top