Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Pressing Load for Rivets

Status
Not open for further replies.

qsexp

Automotive
Joined
Jul 22, 2002
Messages
8
Location
IN
Hi All,

We are developing a "U" pulley where two sheet metal 'drawn' cups have to be riveted back to back. Can anyone help in determine the pressing load for the forming Rivet heads. The sheet thickness for each cup is 2 mm and the shank dia of the Rivet is 5 mm. The groove dia of the pulley is 128 mm. There are 18 rivets placed radially

Regards



 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top