Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Predefined Field Update?

Status
Not open for further replies.
mmmbordo643

mmmbordo643

New member
Joined
Feb 24, 2006
Messages
31
Location
US
Can anyone clue me in on when to use the "Update Reference Configuration" option when creating a predefined field for the initial state? I am trying to get the resonance frequencies of the resulting deformed object. Thanks everyone

Chris
 
Status
Not open for further replies.

Similar threads

SKSA
  • Locked
  • Question Question
How to Apply Geostress in Predefined Field for Slope
Replies
8
Views
701
SKSA
SKSA
otaviobarodrigues
  • Question Question
Pipe pressure load with analytical field and hydrostatic pressure
Replies
2
Views
8K
otaviobarodrigues
otaviobarodrigues
ShiningEngineer
  • Locked
  • Question Question
Change colour of field visualisation
Replies
1
Views
2K
FEA way
FEA way
BigMims
  • Locked
  • Question Question
Strain field smoothing
Replies
2
Views
398
BigMims
BigMims
B
  • Question Question
Adaptive Meshing with Custom Phase‑Field UEL in Abaqus – Feasible or Challenging?
Replies
1
Views
3K
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top