Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Post Processing Legend Formatting

Status
Not open for further replies.
Transient1

Transient1

Mechanical
Joined
Jan 31, 2007
Messages
267
Location
US
Hi,

I would assume that there is a way to display only two decimal places in the legend for a temperature solution in workbench V10. I can't seem to find any menus that allow me to change this. I am sure that I am missing something simple. Thanks in advance.

 
Sort by date Sort by votes
I found it. Somehow I missed it twice. The path is

Tools>>Options>>Common Settings>>User Interface
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

V
  • Locked
  • Question Question
Boundary conditions and post processing for Planar tension test
Replies
0
Views
606
vsw
V
shiraz883
  • Locked
  • Question Question
Weld post processing using Fsum/PRNLD command on coupled nodes (cpintf)
Replies
0
Views
389
shiraz883
shiraz883
Low12
  • Locked
  • Question Question
ACP Post: When does layer fail?
Replies
0
Views
188
Low12
Low12
andradesilva
  • Locked
  • Question Question
Difference between 4 different Temperature metrics in ANSYS CFD-Post
Replies
0
Views
174
andradesilva
andradesilva
Umat
  • Locked
  • Question Question
Post-processing using APDL snippet - issue with body named selection
Replies
0
Views
250
Umat
Umat

Part and Inventory Search

Sponsor

Back
Top