Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Porous Sparger design

Status
Not open for further replies.
lelava

lelava

Bioengineer
Joined
Jul 14, 2006
Messages
12
Location
NL
Hi. I have to incorporate a porous plastic sparger (made of UHMWPE) in a 'plastic' bag, with an LDPE film. I think some of the designs possible are an o-ring around the porous membrane, which is then welded to the ldpe film, or a nozzle pipe, with around that the membrane to release the air. I was just wondering if there were any other types, and what tips people have for design and placement of the sparger, and which is best.
Thanks in advance for the help.
Cheers
 
Sort by date Sort by votes
McMaster-Carr sells plastic air mufflers with pipe threaded terminations. They are cheap enough to be disposable, and very effective spargers. They appear to be made of PE.





Mike Halloran
Pembroke Pines, FL, USA
 
Upvote 0 Downvote
Hey. Thanks, useful website/tip.
Cheers
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

lelava
  • Locked
  • Question Question
Porous sparger design
Replies
2
Views
217
Guinness2007
Guinness2007

Part and Inventory Search

Sponsor

Back
Top