Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Point Set in Function Manager for a Co-Simulation

Status
Not open for further replies.
imoerial

imoerial

Automotive
Joined
Oct 24, 2014
Messages
1
Location
GB
Hello,
In a Co-Simulation in NX 9.0 I would like to export the coordinates of all the points of a point set to Matlab. Does anybody know if it's possible to implement a pre-defined point set into the funtion manager so that I can use it as an output in the simulation?
I have already exported the coordinates of the point set to a textfile using Journal, but now I need this information "live", since the point set is moving in the simulation...

Thanks a lot for your help in advance.

imoerial
 
Status
Not open for further replies.

Similar threads

ASHWA
  • Locked
  • Question Question
Teamcenter - Project Manager - INACTIVE Projects.
Replies
0
Views
943
ASHWA
ASHWA
Jian Wang
  • Locked
  • Article Article
Reconstruct missing areas in a point cloud face
Replies
6
Views
4K
Jian Wang
Jian Wang
P
  • Question Question
any company/individual with a NX licese for sale?
Replies
2
Views
2K
peritoind
P
NXsupport
  • Locked
  • Question Question
Is there a way to make extrude dialog remember the limits options set in the dialogbox
Replies
3
Views
3K
Ammaniya
A
ppap eroni
  • Locked
  • Question Question
I have a question about the ug function.
Replies
2
Views
609
ppap eroni
ppap eroni

Part and Inventory Search

Sponsor

Back
Top