Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

point of cross lines - dimension

Status
Not open for further replies.
krzysiek

krzysiek

Industrial
Joined
Aug 11, 2006
Messages
22
Location
NL
I got two crossed lines - sketch in part. Now in Draft: how to catch a point of intersection with dimension? In quicpick I got only line1 and line2, no point.
 
Sort by date Sort by votes
krzysiek,

Go to Tools-Intellisketch and make sure the Intersection Point box is checked.
 
Upvote 0 Downvote
Also make sure the checkbox of 'extensions' is checked.

This box is the lowest in the intellisketch menu.

IJsbrand
 
Upvote 0 Downvote
You can put a point at the intersection of the two lines in the sketch, then you should also be able to see it in draft.

bc
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

J
  • Locked
  • Question Question
VBA to Pull Total Surface Area and Volume for a Part of an Assembly?
Replies
0
Views
1K
jdconnel
J
jcpalekar
  • Locked
  • Question Question
How to handle occurrence properties of solid edge through excel sheet?
Replies
0
Views
1K
jcpalekar
jcpalekar
NZMark
  • Locked
  • Question Question
Dimension scaling of drawing objects in Draft
Replies
3
Views
2K
kjoiner
kjoiner
RC-o2
  • Locked
  • Question Question
The rollback event cannot allow saving of the active document because we could not get valid pointer
Replies
0
Views
896
RC-o2
RC-o2
John_W2
  • Locked
  • Question Question
Combining model dimensions in drawings
Replies
0
Views
951
John_W2
John_W2

Part and Inventory Search

Sponsor

Back
Top