Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

PMI confirmation

Status
Not open for further replies.
ishtechmech

ishtechmech

Mechanical
Joined
Jun 19, 2012
Messages
4
Location
IN
Please see the attached positive material identification results. One component is SS 316 and another is Copper. Kindly suggest which welding consumable ( electrode /filler ) shall be suitable for welding of these parts . What precautions to be taken while doing this welding.

Regards
Alok
 
 https://files.engineering.com/getfile.aspx?folder=5a5ab64b-b14f-4cc3-8068-cbf7ceee8c9e&file=IMG-20230424-WA0092.jpg
Status
Not open for further replies.

Similar threads

Aliq298
  • Locked
  • Question Question
Confirmation needed regarding bevel preparation
Replies
1
Views
168
pandithan
pandithan

Part and Inventory Search

Sponsor

Back
Top