Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Pletab in batch mode

Status
Not open for further replies.
redrummond

redrummond

Mechanical
Joined
Oct 2, 2012
Messages
1
Location
GB
Hi,

I've been trying to get a few pictures in batch mode and for the most part the /show macro I'm using works well except when it comes to pletab it just ends up taking a picture of an nplot. Anyone come across something that works?

Thanks,

RED
 
Status
Not open for further replies.

Similar threads

netsonicyxf
  • Question Question
Add supports in the Lusas model
Replies
1
Views
3K
rb1957
rb1957
YuJie_PV
  • Question Question
1/2 loading for 1/2 model in ansys?
Replies
9
Views
10K
YuJie_PV
YuJie_PV
Y
  • Locked
  • Question Question
Rutman Fastener Modelling in Patran
Replies
2
Views
3K
Alex Szatmary
Alex Szatmary
AhmedEltaweel
  • Question Question
stresses in girder using CSI bridge
Replies
0
Views
5K
AhmedEltaweel
AhmedEltaweel
G
  • Locked
  • Question Question
Modelling a post-tensioned stone arch or beam in Strand7
Replies
3
Views
2K
Gigi2000
G

Part and Inventory Search

Sponsor

Back
Top