Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations Ron247 on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Please help me:what's the dimension requires of the fire compartment and smoke compartment

Status
Not open for further replies.
V

Vinny-wong

Mechanical
Mar 11, 2025
4
in NFPA101, I found the dimension requires for the smoke compartment, but no requires for the fire compartment, is the same thing? thanks
 
Status
Not open for further replies.

Similar threads

KGisME
  • Locked
  • Question
Help me calculate the CFM of this fan in our application
Replies
14
Views
7K
Snickster
Snickster
Befuddled
  • Question
Entrainment rate of wind over the top of a stack
Replies
8
Views
5K
LittleInch
LittleInch
M
  • Locked
  • Question
Refrigerant indoor unit for cooling - what is the entering Wet Bulb Temperature?
Replies
5
Views
3K
MMAnd
M
2-Pipe FCU
  • Locked
  • Question
A hybrid fan coil heat pump to solve the 2 pipe fan coil issue
Replies
0
Views
3K
2-Pipe FCU
2-Pipe FCU
kikonas68
  • Locked
  • Question
Location of expansion tank and circulator relative to the plate heat exchanger
2
Replies
24
Views
2K
kikonas68
kikonas68

Part and Inventory Search

Sponsor

Back
Top Bottom