-
1
- #1
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
PLC and SCADA book for beginner 3
- Thread starter Edw1n
- Start date
-
1
- #2
On the SCADA or DAQ side:
Practical SCADA for Industry, by David Bailey, published by Newnes, 2003
or
Practial Data Acquisition for Instrumentation and Control Systems, by John Park, published by Newnes, 2003
To all appearances, the DNP comm protocol is used only by the power people, hence
Practical Modern SCADA Protocols, DNP3, 60870.5 and Related Systems by Gordon Clarke & Deon Reynders, 2004, published by Elsevier Science & Technology
Practical SCADA for Industry, by David Bailey, published by Newnes, 2003
or
Practial Data Acquisition for Instrumentation and Control Systems, by John Park, published by Newnes, 2003
To all appearances, the DNP comm protocol is used only by the power people, hence
Practical Modern SCADA Protocols, DNP3, 60870.5 and Related Systems by Gordon Clarke & Deon Reynders, 2004, published by Elsevier Science & Technology
-
1
- #3
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question