![[morning]](/data/assets/smilies/morning.gif "[morning] [morning]")
I need to solv the varous angled pipelines. Please help me with this task. The offset curve is creating the solution but it is not possible to increase or decrease the No of pipelines, just the dim betven them. The pattern curve have the No parameter, but not soling the prelenghting and the corner of cuves. Finally the best solution is the automatically changing the pipes "More or less" by parameter not just the pipe centercurves. The bend radius must be same. It is possible to do? I am a NX 7.5 user.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Pipeline Parametrisation
- Thread starter Dobos
- Start date
- Status
I need to solv the varous angled pipelines. Please help me with this task. The offset curve is creating the solution but it is not possible to increase or decrease the No of pipelines, just the dim betven them. The pattern curve have the No parameter, but not soling the prelenghting and the corner of cuves. Finally the best solution is the automatically changing the pipes "More or less" by parameter not just the pipe centercurves. The bend radius must be same. It is possible to do? I am a NX 7.5 user.