Pipeguide on U or anglesteel

[europipe]

Dear collegaes,
Is there a manufacturer that has a good solution for providing pipeguides on horizontal U or anglesteel? (NO HOTWORK)
Sometimes someone provided this type of steel (wrongly) instead of IPE or HE beams.
Thank You for Your support in advance.

 

[bimr]

It will depend on the type of pipe that you are installing. There are a number of different types of supports:

http://www.nationalpipehanger.com/pages/catindex.php#/38

 

[11echo]

A double nutted U-bolt works pretty well as long as there's no big stress that it has to buck!

 

[europipe]

Sorry for my incoplete info, I meant a solid shoe guide for a 10 to 18" line with considerably forces on it.

 

[bimr]

You would have to make something up. Probably have to weld threaded rod to a shoe, drill holes into the steel and then attach.

 

[europipe]

I was afraid for that , thank You gentlemen.