Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Piling
- Thread starter ake71
- Start date
Retrograde
Structural
[ul]
[li]Pile type (difficult to omit the cap with driven piles);[/li]
[li]Relative dimensions between the pile and the column;[/li]
[li]Differing concrete grades between the pile and the column;[/li]
[li]Allowance for tolerances (usually piles have a much larger positional tolerance than columns);[/li]
[li]Contractor preference (it can be difficult to accurately place columns starters in piles).[/li]
[/ul]
[li]Pile type (difficult to omit the cap with driven piles);[/li]
[li]Relative dimensions between the pile and the column;[/li]
[li]Differing concrete grades between the pile and the column;[/li]
[li]Allowance for tolerances (usually piles have a much larger positional tolerance than columns);[/li]
[li]Contractor preference (it can be difficult to accurately place columns starters in piles).[/li]
[/ul]
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question