Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

phase transformation

Status
Not open for further replies.
marecare02

marecare02

Mechanical
Joined
Mar 19, 2010
Messages
6
Location
SI
Hi!

I am trying to simulate phase transformation during rapid heating and cooling in laser hardening process. I modeled laser heat source with dflux user subroutine for non-gaussian heat source. I would like to know which subroutine to use to model phase transformation and volume fraction (martensite, austenite, bianit, perlit, ferit) during laser heating. I was thinking about USDFLD. Any suggestions? examples?

thanks in forward
 
Status
Not open for further replies.

Similar threads

Adil Memet
  • Question Question
Abaqus Metallurgical phase transformations simulation example running problem
Replies
6
Views
8K
Adil Memet
Adil Memet
R.Eng
  • Locked
  • Question Question
Phase transformation in 3d printing
Replies
1
Views
197
FEA way
FEA way
B
  • Question Question
Adaptive Meshing with Custom Phase‑Field UEL in Abaqus – Feasible or Challenging?
Replies
1
Views
3K
FEA way
FEA way
anoop_1989
  • Locked
  • Question Question
Calculating cooling rate for incorporating phase transformation in welding?
Replies
3
Views
218
anoop_1989
anoop_1989
Frankie183
  • Locked
  • Question Question
Phase graph is discontinuous, why?
Replies
3
Views
293
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top