Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

phase shifting gearbox

Status
Not open for further replies.

billbot

Mechanical
Nov 14, 2001
1
Looking for information / suppliers of phase shifting gearboxes
 
Replies continue below

Recommended for you

This may be too late to be of any help but I recall that Andandex USA Inc.
manufactures phase shifting gearboxes.
They are located at 1705 Valley Road, Ocean Township, NJ 07712
Their telephone number is 908 493 2812

Ciao
 
You could use a planetary gearbox (or any gearbox with in-line shafts, but a planetary is balanced) and turn the housing as needed. Mounting would be the question, and holding the housing in position.

Another manufacturer of phase shifting mechanisms is Candy, in Chicago.

Windward
 
If you don't need too much force, electronic solution may be cheaper. <nbucska@pcperipherals.com>
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor