Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
pH calculations for process streams
- Thread starter newbie12
- Start date
- Thread starter
- #2
Sorry should add that the reason why I am reducing the NaOH is that I am adding milk of lime solution in the preceding stages.
I am aware that the pH will increase significantly which is why I need to reduce the NaOH in the preliminary steps and set up a new pH set point.
I am trying to calulate how much the pH changes for the addition of milk of lime solution (reducing NaOH dosing rates)
I am aware that the pH will increase significantly which is why I need to reduce the NaOH in the preliminary steps and set up a new pH set point.
I am trying to calulate how much the pH changes for the addition of milk of lime solution (reducing NaOH dosing rates)
- Status
Similar threads
- Question