Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Petrochemical Drafting Standards

Status
Not open for further replies.

gmurrie99

Geotechnical
Feb 9, 2006
2
I am searching for a definitive guide on drafting standards specifically for the petrochemical industry. I have checked several obvious sources and found nothing specific about refineries or other petrochemical facilities. Any help is greatly appreciated.
 
Replies continue below

Recommended for you

Here are some that come to mind:

ANSI Y32.11 Process Flow Diagrams in the Petroleum and Chemical Industries.

ANSI Y14.15.a Interconnection Diagrams

USAS Y14.15 Electrical & Electronics Diagrams

ANSI Y32.2 Graphics Symbols for Electrical & Electronics Diagrams

ASME Y14.5M Dimensioning and Tolerancing

Best Regards,

Heckler
Sr. Mechanical Engineer
SW2005 SP 5.0 & Pro/E 2001
Dell Precision 370
P4 3.6 GHz, 1GB RAM
XP Pro SP2.0
NVIDIA Quadro FX 1400
o
_`\(,_
(_)/ (_)

Never argue with an idiot. They'll bring you down to their level and beat you with experience every time.
 
Possibly dumb question but what country are you in?

This will probably make a difference.

Most posters on this forum seem to be US (or maybe Canada) and respond accordingly with ASME/ANSI etc stds.

If you are in another country different specs will apply.

These days most seem to be gradually converging onto the ISO but there are still differences.

Ken
 
Thank all of you gentlemen for your kind help. Ctopher and Heckler, you both gave me great leaping off points from which we have found some of what we are looking for.

Kenat asks a fair question; we are in the U.S.A. but, our clients and other partner companies are on every continent. The inconsistencies we are seeing could also be due to ASME/ANSI vs. ISO.

Do any of you gentlemen know if this issue has been looked at by any industry organizations?

Thanks again for all your help!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor