morecoffeeplz
Civil/Environmental
Anyone know if there is a standard test to measure the hydraulic conductivity of hardened concrete?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Permeability of hardened concrete?
- Thread starter morecoffeeplz
- Start date
- Status
morecoffeeplz:
From the ACI website:
Q. How is the permeability of concrete determined?
A. With difficulty and usually indirectly, indications of the permeability of concrete are determined by air and water permeability tests (ACI 228.2R); or by the ponding test (ASTM C1543); or by the rapid chloride penetration test (ASTM C1202).
Regards,
DB
From the ACI website:
Q. How is the permeability of concrete determined?
A. With difficulty and usually indirectly, indications of the permeability of concrete are determined by air and water permeability tests (ACI 228.2R); or by the ponding test (ASTM C1543); or by the rapid chloride penetration test (ASTM C1202).
Regards,
DB
Here's the test method that we use:
The link takes you to all our, "Virginia Test Methods." You'll have to scroll down for VTM 112.
f-d
ípapß gordo ainÆt no madre flaca!
The link takes you to all our, "Virginia Test Methods." You'll have to scroll down for VTM 112.
f-d
ípapß gordo ainÆt no madre flaca!
- Status
Similar threads
- Question
- Locked
- Question
- Question
- Question