I am searching for verbiage that will specify a performance test that receiving inspectors can perform in a non-conspicuous area to check for paint adhesion. Perhaps an "X" cut into the substrate followed by a standard cellophane tape applied and peeled back. May I hear from you if you have specified this on a drawing?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Peel test for Incoming Inspection
- Thread starter dananay
- Start date
- Status
Similar threads
- Locked
- Question
- Locked
- Question